NGK iridium MR8BI-8 spark plug

 This part is due back in stock soon, call 01484 841395 to reserve yours

1A010638

Also fits Aprilia DORSODURO 900 J ABS (2018-202), Aprilia SHIVER 900 (2017-2020), Piaggio LIBERTY 50 3V I-GET (2017-2018), Vespa PRIMAVERA 50 4T 3V N (2022), Vespa PRIMAVERA 50 4T 3V N (2022), Vespa SPRINT 50 4T (2018), Vespa SPRINT 50 4T 3V N S (2022)

Right hand Domino type starter switch for use with separate throttle, e.g. Tommaselli twin pull throttles ACA10500 or ACA10501

On most bikes this will not plug directly into the wiring loom, you will need to match the wires to your loom. If replacing 'Lego' type switchgear (e.g. Le Mans 2, V50) with integrated twistgrip you will need a separate twistgrip, see ACA10500 and ACA10501. Packaging may include explanation of switchgear wire covers. This type originally fitted as standard to the early V11 Sport models. See the wiring diagram on our technical documents page for help installing this switchgear.. Molex connectors available separately.

 This part is due back in stock soon, call 01484 841395 to reserve yours

 01738800 GU01738800 01 73 88 00
 0173 8800 0173.8800 01.73.88.00

Switch used as rear stop switch or clutch switch

Used as rear stop light switch on V85TT

 This part is available by special order, request a quote

2D000325

Also fits Aprilia RSV 1000, Aprilia Tuono

Prolong battery life with this 9 stage smart battery charger, suitable for 6v, 12v AGM and lead acid batteries.

Weatherproof - suitable for use outside 6V / 12V 1A Auto-sensing charger. Suits all AGM, Lead Acid, Calcium and Gel batteries Charges 6v and 12v batteries Ring terminal and alligator clip harnesses included Spark proof Maintains full charge Simple, connect and wait for green light Overload / Short circuit protection See ACA96001 for a spare set of charging leads (e.g. for a separate bike).

 This part is due back in stock soon, call 01484 841395 to reserve yours

Speedo sensor on ABS equipped models, used for front and rear applications depending on model

Used as rear wheel ABS sensor on V85TT, front and rear sensor on V7 II ABS equipped models. There are several variants of these sensors, please compare to the sensor on your bike or contact us with a chassis number before ordering. Supercedes Guzzi ref. 6429875. 2 pin connector

 This part is due back in stock soon, call 01484 841395 to reserve yours

 859792 MG859792

Starter motor deposit, buy this deposit if you are buying one of our reconditioned starter motors and we haven't already received your servicable exchange unit. This deposit will be refunded once we receive your complete reconditionable Valeo or Bosch starter and solenoid

 More than 5 in stock

High performance Quadflex maintenance free Motobatt 12 volt 14Ah battery. Quadflex technology means you have two positive and two negative threaded terminals allowing maximum flexibility when installing. Motobatt absorbed gel matting batteries feature the latest absorbent glass mat technology. This offers increased lifespan, higher vibration resistance and electrical performance. This battery is also leak, vibration and spill proof if installed correctly.

NB this battery is physically smaller than the OE battery fitted to the Quotas

200 CCA.
4 x M6 terminals
Supplied charged and ready to fit with terminal brackets and button head screws.
NB This battery must not be trickle charged or charged using a traditional manual charger, AGM batteries require a smart charger - we recommend ACA96000
For more information on charging AGM batteries see these FAQ's.

If parking your bike up for several weeks we recommend disconnecting one battery terminal to prevent battery drain, this should ensure your bike will start once you are ready to use it again. Replaces YTX12BS, YTX14BS, YTX14LBS, KMX14BS, YTX15LBS and Odyssey PC545. Replaces Guzzi ref. 638733, this battery is for small twins with a single throttle body

One year warranty on all our Motobatt batteries

Also available at the same price in black by special order - call 01484 841395 to order. If you need more performance than a standard AGM battery offers see hybrid battery ELA59015 which ouputs 330 CCA for starting the highest performance twins

Please note this part CANNOT be posted outside of the UK mainland area

 Order now and we will post your order within 7 days.

 638733 MG638733

Left hand Domino type switchgear with high and low beam, pass, indicator and horn switches. Same style switch as ELA01738

On most bikes this will not plug directly into the wiring loom, you will need to match the wires to your loom. An indication of wire colours is supplied with this switchgear. Supplied with 9 pin block connector. NB does not have lights off - park - on function, you need this to be on your RH switch (e.g. ELA01729 ) or run lights always on

 This part is available by special order, request a quote

Domino left hand switchgear with lights on - park - off, high and low beam, pass, indicator and horn switches. Same style switch as ELA01738.

Already wired in to 9 pin block connector (you may need to alter the wiring on your bike to correspond to this block connector). Originally fitted as standard to early V11 Sport models. See the wiring diagram on our technical documents page for help installing this switchgear. See Greg Bender's website for a custom sub-loom that enables easy fitting of this part to models previously fitted with LEGO style swithgear

 This part is due back in stock soon, call 01484 841395 to reserve yours

 01738030 GU01738030 01 73 80 30
 0173 8030 0173.8030 01.73.80.30

Oil temperature sensor, brass threaded body

 This part is available by special order, request a quote

 887421 MG887421

Also fits Aprilia 900 Dorsoduro, Aprilia 900 Shiver